Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda X Adv
Part: Battery

To remove the battery on the Honda X Adv 750, first access the under-seat compartment, clear it of any items, and remove the lower cover. Now, using a plastic wedge, unclip all the clips securing the battery cover in place, as shown in the video. At this point, unclip the strap holding the battery in place, unscrew and then disconnect the terminals (always unscrew the negative terminal first and only then the positive) and remove the battery. Proceed in reverse order until complete reassembly. As you can see, this is a very simple operation.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Battery Located in the Honda X-ADV 750?
Where is the Battery Located in the Honda X-ADV 750?
X Adv This guide shows the location of the battery in the Honda X-ADV 750. To access the battery compartment, open the storage area under the seat and remo…
How to replace the battery in the Honda X-ADV 750 scooter?
How to replace the battery in the Honda X-ADV 750 scooter?
X Adv In this tutorial, we can see how to replace the battery in the Honda X-ADV 750 scooter, an extremely simple and quick operation. First of all, make s…
How to adjust the time on the Honda X-ADV 750 scooter?
How to adjust the time on the Honda X-ADV 750 scooter?
X Adv In this tutorial we can see how to adjust the time on the Honda X-ADV 750 scooter, an extremely simple and quick operation, to be carried out for exa…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos