Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The right and left air filters are located in the same way and should be removed similarly. As shown in the video (where we demonstrate the right air filter), undo the two bolts above the side fairing, then undo the one near the windscreen. Still at the front of the bike, remove the three clips (per side) located under the side fairing and also the central clips. Once the front mask is removed, you will have access to the screws of the air filter box, which you can undo with a screwdriver to replace the filter itself and then proceed in reverse for reassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Honda Africa Twin?
How to Replace the Air Filter on the Honda Africa Twin?
Africa Twin To replace the air filter on the Honda Africa Twin, loosen the screws securing the protective fairings on the left side of the bike, near the fuel ta…
How do you replace the exhaust pipe of the Honda Africa Twin?
How do you replace the exhaust pipe of the Honda Africa Twin?
Africa Twin To replace the muffler of the Honda Africa Twin, you need to loosen the screws that hold it to its housing on the right side of the motorcycle, near …
How to Replace the Air Filter on the Honda Africa Twin?
How to Replace the Air Filter on the Honda Africa Twin?
Africa Twin To replace the air filter on the Honda Africa Twin, loosen the bolts securing the right side fairing at the front of the bike, just below the fuel ta…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos