Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will learn how to remove and replace the headlight bulb on a Honda CBR 600RR motorcycle. First, remove the plastic clips from the side fairings to easily access the back of the headlamp; then take off the plastic cover behind the headlight and remove the mirrors by unscrewing the screws from the front fairing. At this point, remove the front headlight and disconnect the electrical connector of the bulb; then unclip the metal spring and extract the bulb, replacing it with a new one (of the correct type)!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Honda CBR 600RR?
How to replace the front headlight bulbs in the Honda CBR 600RR?
Cbr 600 Rr In this tutorial, we can see how to replace the front headlight bulbs in the Honda CBR 600RR, an extremely simple and quick operation. First of all, …
How do you replace the muffler of the Honda CBR 600RR?
How do you replace the muffler of the Honda CBR 600RR?
Cbr 600 Rr The exhaust pipe of the Honda CBR 600RR can be replaced by loosening the screws that secure the exhaust terminal to its housing, which is located nea…
How to Replace the Exhaust of the Honda CBR 600RR?
How to Replace the Exhaust of the Honda CBR 600RR?
Cbr 600 Rr To replace the exhaust of the Honda CBR 600RR, loosen the screws that secure the exhaust end can to its housing: this is located near the rear mudgua…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos