Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the motor oil on the Honda CBR 600RR is done by loosening the screws that fix the engine guard plates, located on both sides of the vehicle. Once these parts are removed, it will be possible to loosen the drain plug below: in this way, all the used oil that will be expelled can be collected in a properly positioned container. At this point, the top-up can be done by inserting the new oil through the breather located on the right side of the motorcycle's engine case: by inserting the necessary amount of oil, it will be possible to reassemble all the components that have just been removed.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Honda CBR 600RR
How to Change the Engine Oil in a Honda CBR 600RR
Cbr 600 Rr In this tutorial, you will learn how to change the engine oil in a Honda CBR 600RR, a simple and quick operation. First, ensure the engine is cool en…
How to change the engine oil in the Honda CBR 600RR?
How to change the engine oil in the Honda CBR 600RR?
Cbr 600 Rr Changing the engine oil in the Honda CBR 600RR, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the engine to …
How do you replace the engine oil of the Honda CBR 600RR?
How do you replace the engine oil of the Honda CBR 600RR?
Cbr 600 Rr To replace the motor oil on the Honda CBR 600RR, it is necessary to loosen the screws that secure the lower protection plate, located on both sides o…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos