|
Do it yourself
| |||
| ||||
Model: Honda Cb 500
In this short video, you will see how to bleed and replace the brake fluid on a Honda CB 500 motorcycle in simple and quick steps. First, remove the cap from the front brake fluid reservoir by unscrewing the two fixing screws; then connect a tube to the bleed nipple and open the screw with a spanner. At this point, press the front brake lever a couple of times to bleed the brake fluid circuit; once finished, close the bleed screw and pour the new fluid into the reservoir!
Updated on 17 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Cb 500
Hello, today’s goal is to remove the spark plug from our Honda CB 500. Start by removing the side fairings of the motorcycle by unscrewing the releva…
Cb 500
In this tutorial video, you will learn how to remove and replace the bulbs in the instrument cluster of a Honda CB 500. First, unscrew the fixing scr…
Cb 500
In this guide, you will learn the steps to disassemble and replace the clutch discs on a Honda CB 500 motorcycle. First, place your motorcycle on the…
|
How to Replace the Battery of the Kymco Agility 125?
To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |