Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Hornet Cb600f
In this video, follow the step-by-step instructions to remove and replace the front brake pads on the Honda Hornet CB600 FA. First, undo the two bolts securing the front brake caliper to remove it from the disc; then remove the two side clips and extract the pads from inside the caliper. Clean the caliper and push the piston back to facilitate the insertion of the new pads; now insert the pads and reassemble everything by applying the reverse procedure!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Air Filter on Honda CB600F 2008
Replacement of Air Filter on Honda CB600F 2008
Hornet Cb600f Descriptive guide for replacing the air filter on a 2008 Honda Hornet CB600F. Obtain an HIFLO air filter HFA1618. Position the motorcycle on the side…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos