Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to adjust the brightness of the instrument panel on the Honda SH 125. The operation does not require specific tools and can be done independently. The first operation to perform is to turn on the instrument panel. To enter the settings modification mode, set the odometer to the total kilometres position ("TOTAL"). At this point, while holding down the "Info A" and "Info B" buttons simultaneously, you will enter the settings menu and the hour format will start to flash. Press "Info B" until five dots appear on the display. With the "Info A" button, you can adjust the brightness from the highest level to the lowest. Exiting the settings menu will make the changes to the instrument panel brightness effective.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Honda SH125 and SH150
How to Reset the Oil Change Light on the Honda SH125 and SH150
Sh 125i (1984-2020 / ) This guide shows how to reset the oil change light on the Honda SH125 and SH150 with a digital dashboard. After turning on the ignition, press and ho…
How to Set the Time on Honda SH 125 Scooter?
How to Set the Time on Honda SH 125 Scooter?
Sh 125i In this tutorial, learn how to set the time on the Honda SH 125 scooter, a very simple and quick operation, for example, after switching to daylight …
How to Install the Side Stand on a Honda SH 125
How to Install the Side Stand on a Honda SH 125
Sh 125i Let's see how to install the side stand on a Honda SH 125. Start by unscrewing the screws that hold the footrest together. You can find the Buzzetti …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos