Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you start, run the engine of your Honda Dominator NX650 for a few minutes, then position it on a suitable motorcycle stand. Begin by removing the lower oil drain nut to let the engine oil flow out. After that, wait for all the oil to drain. Once done, re-tighten the drain nut, then unscrew the top-up cap. At this point, add new engine oil (using a funnel), then re-tighten the top-up cap, and you will have completed the oil change.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of a Honda Dominator 650?
How to Change the Engine Oil of a Honda Dominator 650?
Dominator Nx650 Good morning, today’s goal is to change the engine oil of our Honda Dominator 650. Before starting, it is important to warm up the engine for 5 minut…
How to install heated grips on a 1997 Honda Dominator
How to install heated grips on a 1997 Honda Dominator
Dominator Nx650 Installing heated grips during the winter can be a pleasant solution for those who ride a motorcycle during the colder seasons. Today we will explain…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos