Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Clutch Lever on a Honda NC 700X

Model: Honda Nc 700x
Part:

Video tutorial

In this video tutorial, you will find instructions to remove and replace the clutch lever on a Honda NC 700X in simple steps. First, remove the rubber cover from the lever; then unscrew the fixing screw using a flat screwdriver.

At this point, disconnect the pipe that runs under the lever by unscrewing the screw with a spanner, and extract the lever itself; now reassemble the entire lever and, if necessary, the lever holder, then adjust the clutch using the appropriate adjusters; apply the reverse procedure for reassembly!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Honda NC 700X
How to Replace the Air Filter of the Honda NC 700X
Nc 700x To replace the air filter of the Honda NC 700X, open the glove compartment located at the front of the bike, just behind the handlebars: by opening t…
How to replace the air filter of the Honda Nc 700X
How to replace the air filter of the Honda Nc 700X
Nc 700x Below are the instructions to remove and replace the air filter of the Honda Nc 700X motorcycle engine. First, place the bike on its centre stand and…
How to check and top up the coolant in the Honda NC 700X
How to check and top up the coolant in the Honda NC 700X
Nc 700x This guide outlines the steps to check the engine coolant level and top it up in the Honda NC 700X. First, place the bike on its stand and begin by r…

How to Replace the Front Headlight on a Husqvarna 701?

To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you can detach the fairing and subsequently disconnect all the connectors attached inside. Once the fairing is released, loosen the screws located inside to completely detach the old headlight from the fairing. At this point, insert the new headlight, connect it and secure it with screws, then reinstall the fairing in the corresponding housing.

Watch the video!


by ScegliAuto

More videos