Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Sh 150
    4. : How do you replace the top case of the Honda SH 150?

Model: Honda Sh 150
Part:
How do you replace the top case of the Honda SH 150?

In order to replace the top case of the Honda SH 150 you need to lift the handle located in the rear part of the top case. Under it there will be a lock, in which it will be necessary to insert the appropriate key, turning it clockwise. By pressing the central button, while the key is inserted and turned, it will be possible to detach the motorcycle case from its support. At this point the new top case must be inserted inside the special fixing grooves. It will have to be stuck by also giving it a few taps to insert it in the best possible way; at the end, the rear handle can be lowered.


Posted on 3 March 2024 by ScegliAuto



Open the 2020 Honda SH 150 top case
Sh 150 In this video tutorial you can see how simple it is to open the top case of the new Honda SH 150 scooter by following simple steps that will accompan
How to replace the position light bulb on Honda Sh 150?
Sh 150 To replace the position light bulb of a Honda Sh 150 just follow the simple steps shown in this video. Basically it is enough to unscrew the two Alle
How to reset the Honda SH 150 oil light
Sh 150 If when you start your Honda SH 150 you notice that the oil warning light remains on despite having already changed the fluid, then you must necessar

How to change the engine oil and relative filter of Suzuki Access 125

The guide shows how to replace the engine oil and relative filter on the Suzuki Access 125 scooter. The first operation to perform is to open the stand and secure the vehicle. At this point, having opened the oil filler cap, unscrew the 14 mm drain bolt from the bottom of the scooter; place a container for fluid disposal. Carry out a cleaning cycle from the old oil with diesel oil or with the specific additive. Install the new drain plug gasket and put it back in place. Unscrew the three 8 mm fixing bolts of the filter cover and remove the old cartridge and gasket. Install the new elements after cleaning the housing and tighten the cover in place. Top up the oil tank and run the engine for a few minutes; then realign the fluid to the correct level.

Watch the video!


by ScegliAuto

More videos