Do it yourself
| ||||
|
Model: Honda Cbr 500r
Unscrew the bolts securing the saddle and remove the saddle. Before accessing the air filter box you are obliged to remove the battery: therefore, unhook the fastening strap of the same, then disconnect the two poles, remembering to always start from the negative pole and only then switch to the positive. At this point it is child's play to release (there are four bolts to unscrew) and extract the filter box (disconnect the connector). Fit the new filter by tightening the bolts and proceed backwards until the various parts are completely reassembled. As you can see, this is a rather simple operation.
Posted on 24 March 2024 by ScegliAuto
|
How to replace the rear brake pads of Benelli TRK 502?In order to replace the rear brake pads of the Benelli TRK 502 it is necessary to loosen the bolts that fix the caliper, so that it can be detached from the relative disc of the rear wheel. Once the caliper has been removed, it will be possible to go and extract the old pads from the inside of the caliper so that the new spare parts can be inserted. Once the new pads have been inserted inside the caliper, it will be necessary to position the latter on its disc, fixing it with the bolts that were previously removed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |