Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Honda CBR 250 R

Model: Honda Cbr 250r
Part: Air filter

This video is currently unavailable

Today, we will go through the steps to remove and replace the air filter on a Honda CBR 250 R in simple and quick steps. First, remove the rear seat of your bike and use a screwdriver to unscrew the two fixing screws of the rider's seat to remove it. Then, unscrew the screws of the air filter cover and extract the filter itself, as shown in the video.

At this point, proceed with cleaning or directly replacing it; insert the new filter into the airbox and then reassemble everything!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Honda CBR 250
How to Change the Engine Oil in a Honda CBR 250
Cbr 250r This tutorial shows how to change the engine oil in a Honda CBR 250, a straightforward and quick task. First, ensure the engine is sufficiently cool.…
How to Change the Engine Oil in a Honda CBR 250R?
How to Change the Engine Oil in a Honda CBR 250R?
Cbr 250r As shown in this tutorial, changing the engine oil in a Honda CBR 250R is an extremely simple and quick task. First, wait for the engine to cool down…
How to Replace the Battery of the Honda CBR 250R
How to Replace the Battery of the Honda CBR 250R
Cbr 250r In today's tutorial video, you will learn how to remove and replace the battery of the Honda CBR 250R motorbike, following the instructions below. Fi…

How to Change the Engine Oil of a Yamaha XT 250?

The Yamaha XT 250 is a motorcycle and, like all motorcycles, it does not use a flywheel or buttons for operations like changing the engine oil. Here’s the correct procedure: To change the engine oil of a Yamaha XT 250, ensure the bike is stable on a stand and that the engine is warm to facilitate oil drainage. Locate the oil drain plug under the engine and position a container to collect the used oil. Use a spanner to unscrew the drain plug and let the old oil drain completely. Remove the oil filter located on the side of the engine. Replace it with a new one, ensuring to lightly lubricate the seal with fresh oil before installing it. After installing the new filter, re-tighten the drain plug, being careful to avoid leaks. Find the oil filler cap on the top side of the engine and pour in the specified amount of new oil according to the XT 250 manual. Once filled, start the engine for a few minutes and check for leaks. Turn off the bike, let it rest for a moment, and check the oil level using the dipstick or indicator, adding more oil if necessary. This procedure ensures optimal lubrication for your Yamaha XT 250.

Watch the video!


by ScegliAuto

More videos