Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Honda CBR 250R?

Model: Honda Cbr 250r
Part: Instrument panel light

Video tutorial

As shown in this tutorial, changing the engine oil in a Honda CBR 250R is an extremely simple and quick task. First, wait for the engine to cool down sufficiently.

Then, remove the lower fairing, open the filler cap, and using a 12 mm socket spanner, unscrew the drain bolt. Allow all the oil in the system to drain out completely, open the filter housing, and proceed with its replacement.

At this point, simply reassemble everything and add the necessary amount of oil through the upper hole.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Honda CBR 250R?
How to Replace the Exhaust on a Honda CBR 250R?
Cbr 250r To replace the exhaust on a Honda CBR 250R, loosen the screws that secure the side panels located on the right side of the bike, near the rear wheel.…
How to Replace the Battery of the Honda CBR 250R
How to Replace the Battery of the Honda CBR 250R
Cbr 250r In today's tutorial video, you will learn how to remove and replace the battery of the Honda CBR 250R motorbike, following the instructions below. Fi…
Replacement of the engine coolant of the Honda CBR 250R
Replacement of the engine coolant of the Honda CBR 250R
Cbr 250r These short and simple instructions will show us the process of replacing the engine coolant of the Honda CBR 250R motorcycle. First, we put the moto…

How to Change the Engine Oil of a Yamaha XT 250?

The Yamaha XT 250 is a motorcycle and, like all motorcycles, it does not use a flywheel or buttons for operations like changing the engine oil. Here’s the correct procedure: To change the engine oil of a Yamaha XT 250, ensure the bike is stable on a stand and that the engine is warm to facilitate oil drainage. Locate the oil drain plug under the engine and position a container to collect the used oil. Use a spanner to unscrew the drain plug and let the old oil drain completely. Remove the oil filter located on the side of the engine. Replace it with a new one, ensuring to lightly lubricate the seal with fresh oil before installing it. After installing the new filter, re-tighten the drain plug, being careful to avoid leaks. Find the oil filler cap on the top side of the engine and pour in the specified amount of new oil according to the XT 250 manual. Once filled, start the engine for a few minutes and check for leaks. Turn off the bike, let it rest for a moment, and check the oil level using the dipstick or indicator, adding more oil if necessary. This procedure ensures optimal lubrication for your Yamaha XT 250.

Watch the video!


by ScegliAuto

More videos