Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the engine coolant of the Honda CBR 250R

Model: Honda Cbr 250r
Part: Antifreeze coolant

Video tutorial

These short and simple instructions will show us the process of replacing the engine coolant of the Honda CBR 250R motorcycle. First, we put the motorcycle on the stand and start by loosening the coolant drain screw, which can be found at the bottom left; we let the fluid drain into a container, as shown in the video.

At this point, we unscrew the radiator cap located at the top to top up with the new antifreeze coolant suitable for our radiator; finally, we start the engine and top up afterwards, if necessary, until reaching the maximum level.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

How to Replace the Antifreeze in the Honda CBR 250R
How to Replace the Antifreeze in the Honda CBR 250R
Cbr 250r In today's video tutorial, learn how to drain and replace the coolant in the Honda CBR 250R motorcycle. First, place the bike on a stand and begin re…
How to Change the Engine Oil in a Honda CBR 250R?
How to Change the Engine Oil in a Honda CBR 250R?
Cbr 250r As shown in this tutorial, changing the engine oil in a Honda CBR 250R is an extremely simple and quick task. First, wait for the engine to cool down…
How to Replace the Clutch on a Honda CBR 250R
How to Replace the Clutch on a Honda CBR 250R
Cbr 250r To replace the clutch on a Honda CBR 250R, loosen the screws securing the cover on the right side of the bike, allowing the cover to be removed and p…

How to Change the Engine Oil of a Yamaha XT 250?

The Yamaha XT 250 is a motorcycle and, like all motorcycles, it does not use a flywheel or buttons for operations like changing the engine oil. Here’s the correct procedure: To change the engine oil of a Yamaha XT 250, ensure the bike is stable on a stand and that the engine is warm to facilitate oil drainage. Locate the oil drain plug under the engine and position a container to collect the used oil. Use a spanner to unscrew the drain plug and let the old oil drain completely. Remove the oil filter located on the side of the engine. Replace it with a new one, ensuring to lightly lubricate the seal with fresh oil before installing it. After installing the new filter, re-tighten the drain plug, being careful to avoid leaks. Find the oil filler cap on the top side of the engine and pour in the specified amount of new oil according to the XT 250 manual. Once filled, start the engine for a few minutes and check for leaks. Turn off the bike, let it rest for a moment, and check the oil level using the dipstick or indicator, adding more oil if necessary. This procedure ensures optimal lubrication for your Yamaha XT 250.

Watch the video!


by ScegliAuto

More videos