Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Sh 125i
    4. : How to reset the oil warning light on Honda SH 125

Model: Honda Sh 125i
Part: -board computer
How to reset the oil warning light on Honda SH 125

If you have just changed the oil of your Honda SH 125 and you want to permanently eliminate the warning light that appears on the dashboard, all you have to do is follow the instructions below. It only takes a few seconds. First insert the key and turn on the ignition. Then identify the two buttons present and keep them pressed simultaneously for a few seconds. As soon as the oil warning light goes out, release them and turn off the ignition. The reset is finished, but if you have made some mistake you can repeat the whole procedure from the beginning without any kind of problem.


Posted on 7 April 2024 by ScegliAuto



How to reset the Honda SH 125 oil change warning light?
Sh 125i To reset the Honda SH 125 Oil Service warning light, insert the key inside the cylinder and turn it until the instrument panel lights up. The light t
How to reset the oil change light on Honda Sh 125
Sh 125i The oil change service on the Honda SH 125 is carried out for the first time after 1000 km and then at 4000, then at 6000.8000 and 12000 km and the o
How to reset the Honda SH 125 oil warning light
Sh 125i If you have just changed the oil in your Honda SH 125 and the warning light continues to come on, don't worry because thanks to the following reset p

How do you replace the Benelli TnT 899 spark plugs?

To be able to replace the spark plugs of the Benelli TnT 899 you have to unscrew the screws that fix the saddle of the bike and consequently also those that fix the fuel tank to the front of the bike. This can then now be removed to loosen the screws securing the air cleaner box underneath, which will then be removed as well. Now you will have to disconnect the cables connected to the coils, remove the latter from their seat and remove the spark plugs with the appropriate socket wrench. Then you can fit the new spark plugs, position the coils and the filter box, also fitting all the other parts that have been removed.

Watch the video!


by ScegliAuto

More videos