Do it yourself
Frequently asked questions about cars and motorcycles
If you are experiencing malfunctions with the traction control system on your SH 150, you must investigate thoroughly and find the best solution. In the meantime, you can manually disable the TC to avoid worsening any potential damage. First, turn on the ignition. Then, press the "Trip B" button until you see "HSTC-ON" on the mini display. At that point, hold the same button for a few seconds and release it as soon as "HSTC-OFF" appears. The traction control is now disabled. To reactivate it, follow the same procedure.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 150 To replace the coolant on the Honda SH 150, follow these steps: remove the front cover located in front of the radiator by unscrewing the screws on t…
Sh 150 It will be possible to replace the air filter of the Honda SH 150 by loosening the screws that secure the filter housing, which will be located near …
Sh 150 In this video tutorial, you can see how simple it is to open the boot of the new Honda SH 150 scooter by following easy steps that will guide you to …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos