Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If you have just changed the oil on your Honda 125 Swing but still see the oil change warning light on, you need to perform a manual reset. To do this, follow the guide below. First, insert the key and turn on the ignition. Then, press and hold the button located to the left of the rev counter (at the bottom). At this point, turn off the ignition and turn it back on after about three seconds. Release the button as soon as the dashboard stabilises, and the reset operation is successfully completed.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Honda S Wing 125 Scooter?
How to Change the Engine Oil in the Honda S Wing 125 Scooter?
S Wing 125 In this tutorial, we will see how to change the engine oil in the Honda S Wing 125 scooter, an extremely simple and quick operation. First, ensure th…
How to reset the service light on the Honda S Wing 125 scooter?
How to reset the service light on the Honda S Wing 125 scooter?
S Wing 125 In this tutorial we can see how to reset the service on the Honda S Wing 125 scooter, an extremely simple and quick operation, to be carried out only…
How to reset the service on the Honda S Wing 125 scooter?
How to reset the service on the Honda S Wing 125 scooter?
S Wing 125 In this tutorial, we will see how to reset the service on the Honda S Wing 125 scooter, an extremely simple and quick operation that should be done o…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos