Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Spark Plugs on the Honda CB 500F

Model: Honda Cb 500f
Part: Spark plugs

Video tutorial

In this video tutorial, you will learn how to remove and replace the engine spark plugs on the Honda CB 500F motorcycle, following the instructions below. First, place the stand under your motorcycle and start by removing the rider's seat.

Next, unscrew the bolts from the fuel tank; then disconnect the fuel hose and the electrical connector, as shown in the video. At this point, unscrew the bolts of the air filter box to access the cylinder head; remove the spark plug caps and unscrew the spark plugs using a socket wrench with an extension, so you can replace them with new ones!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Honda CB 500F
How to Replace the Air Filter of the Honda CB 500F
Cb 500f Today, we will go through the main instructions that will allow us to remove and replace the air filter of the Honda CB 500F motorcycle. First, place…
How to Replace the Front Headlight Bulb of the Honda CB 500F
How to Replace the Front Headlight Bulb of the Honda CB 500F
Cb 500f Today, we will guide you through removing and replacing the front headlight bulb of the Honda CB 500F motorcycle. First, place the bike on its stand …
How to Service the Honda CB 500F
How to Service the Honda CB 500F
Cb 500f Today, we will guide you through the necessary steps to service the Honda CB 500F, replacing the engine oil and oil filter. First, place your bike on…

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos