Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these main steps to perform routine maintenance by changing the transmission and clutch oil on a Honda CR 125 two-stroke enduro bike. First, place the bike on a stand and start unscrewing the drain bolt located under the engine using a socket spanner, allowing it to drain into a container for about ten minutes. Then, unscrew the filler cap to let the oil drain more quickly, as shown in the video. Finally, top up the oil, following the video to the end!

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Bearings on a Husqvarna CR 125?
How to Replace the Steering Bearings on a Husqvarna CR 125?
Cr 125 To replace the steering bearings on a Husqvarna CR 125, loosen the bolts securing the top clamp and then completely remove the handlebars. At this po…
How to Replace the Piston of the Husqvarna CR 125
How to Replace the Piston of the Husqvarna CR 125
Cr 125 To replace the piston of the Husqvarna CR 125, loosen the retaining ring of the side pipe, then disconnect the pipe. Once the pipe is removed, open t…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos