|
Do it yourself
| |||
| ||||
|
Model: Honda Sh Mode 125
As shown in this tutorial, replacing the battery of the Honda SH Mode scooter remote is an extremely simple and quick task. For this, you will need a small crosshead screwdriver and a replacement CR1220 battery. First, unscrew the screw located at the bottom, near the metal key, then separate the two halves of the remote and extract the central module. Once done, open it using the key itself, remove the old battery, and insert the replacement. Finally, reassemble everything by following the reverse procedure.
Updated on 1 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Sh Mode 125
In this tutorial we can see how to adjust the time on the Honda SH Mode 125 scooter, an extremely simple and quick operation, to be carried out for e…
Sh Mode 125
In this tutorial, we will see how to adjust the time on the Honda SH Mode 125 scooter, a very simple and quick operation, for example, after disconne…
Sh Mode 125
In this tutorial, you will see how to set the time on the Honda SH Mode 125 scooter, an extremely simple and quick operation, to be done after discon…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
