Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This brief and simple guide provides instructions on how to bleed and replace the coolant in the Honda CB 650F motorcycle. First, place the motorcycle on a stand and start by loosening the coolant bleed screw located on the left-hand side cover; allow the fluid to drain into a container for about ten minutes. Next, remove the side plastic fairing and unscrew the radiator cap; then top up with the new coolant suitable for your engine. Start the engine and top up again if necessary!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Honda CB 650F
How to Replace the Air Filter on the Honda CB 650F
Cb 650f This guide briefly outlines the instructions for removing and replacing the engine air filter on the Honda CB 650F. First, place the motorcycle on a …
How to Replace the Engine Oil and Oil Filter on the Honda CB 650F
How to Replace the Engine Oil and Oil Filter on the Honda CB 650F
Cb 650f The process of replacing the engine oil and oil filter is very simple; here’s how to service the Honda CB 650F. First, place your bike on the stand a…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos