Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 650 R
Part: Brake pads

In this brief and simple guide, you will learn how to remove and replace the front brake pads on the Honda CB 650 R motorcycle, following the instructions below. First, place your motorcycle on a stand and begin to unscrew the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston to retract it, thus removing the old pads, as shown in the video. Now, clean the caliper of any residual dirt and install the new high-quality brake pads, reassembling everything!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Honda CB 650R?
How to Replace the Front Brake Pads on a Honda CB 650R?
Cb 650 R The procedure for replacing the front brake pads on a Honda CB 650R can be carried out by loosening the screws that secure the brake caliper to its h…
How to Replace the Engine Oil and Oil Filter on the Honda CB 650 R
How to Replace the Engine Oil and Oil Filter on the Honda CB 650 R
Cb 650 R Today, discover the procedure for performing the routine maintenance service by replacing the engine oil and oil filter on the Honda CB 650 R motorcy…
How to Remove the Display from the Instrument Cluster of the Honda CB 650R
How to Remove the Display from the Instrument Cluster of the Honda CB 650R
Cb 650 R Today's guide will show you the steps to remove and replace the display from the instrument cluster of the Honda CB 650R. First, place your motorcycl…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos