Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the brake pads on the Honda Africa Twin is the same for both the front and rear wheels. In both cases, loosen the bolts that secure the caliper to the respective disc, allowing the brake caliper to be removed from its housing. Once the caliper is removed, you can slide out the old pads from inside, so that the new replacement parts can be inserted. After installation, refit the caliper onto the respective disc, securing it with the appropriate bolts.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Honda Africa Twin?
How to Replace the Air Filter on the Honda Africa Twin?
Africa Twin To replace the air filter on the Honda Africa Twin, loosen the screws securing the protective fairings on the left side of the bike, near the fuel ta…
How do you replace the exhaust pipe of the Honda Africa Twin?
How do you replace the exhaust pipe of the Honda Africa Twin?
Africa Twin To replace the muffler of the Honda Africa Twin, you need to loosen the screws that hold it to its housing on the right side of the motorcycle, near …
How to Install the Frame Brace of the Honda Africa Twin CRF 1000L
How to Install the Frame Brace of the Honda Africa Twin CRF 1000L
Africa Twin In today's tutorial, you will learn how to install the frame brace and engine guard on the Honda Africa Twin CRF 1000L, following the instructions be…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos