Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Honda
  4. : Elite 125
To replace the front brake pads on a Honda Elite 125, loosen the bolts securing the caliper to the front disc so that it can be completely removed. Once the caliper is removed, unscrew the bolts that secure the pads inside, allowing them to be pulled out of their housing. At this point, insert the new pads, securing them with the appropriate screws; then position the brake caliper onto the disc, fastening everything with the screws.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbf 125 In today's tutorial video, you will learn how to remove and replace the front and rear brake pads on the Honda CBF 125 motorcycle. First, place your …
Sh 125i To replace the front brake pads on the Honda SH 125, you need to loosen the bolts that secure the brake caliper to the disc, allowing the caliper to …
Forza 125 The following steps will show us the process of disassembling and replacing the front brake pads of the Honda Forza 125 scooter. First, we put the sc…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos