Do it yourself
Frequently asked questions about cars and motorcycles
Follow the steps below to bleed and replace the engine coolant on the Honda SH 300 scooter. First, place the scooter on its centre stand and begin unscrewing the plastic screws located on the lower left side to access the coolant reservoir. Next, unscrew the bleed screw found on the water pump casing, allowing the fluid to drain into a container. At this point, unscrew the radiator cap and top up with the correct new coolant!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 300i Discover the steps to perform the routine maintenance oil change on the Honda SH 300i scooter. First, position your scooter on the centre stand and s…
Sh 300i The Honda SH 300 features a warning light on the instrument panel that alerts the owner when it's time for an oil change. If you perform the oil chan…
Sh 300i This video shows how to remove and replace the engine spark plug on a Honda SH 300i scooter in simple, quick steps. First, it is advisable to replace…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos