Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The Honda SH 300 features a warning light on the instrument panel that alerts the owner when it's time for an oil change. If you perform the oil change at home or simply want to turn off the light, turn on the ignition and press and hold both the trip and clock buttons on the panel simultaneously for a few seconds until the light goes out. The light will automatically illuminate every 3,728 miles, so if you change the oil early, it will still come on after reaching 3,728 miles since the last reset. In this case, just reset it by following the procedure described above without changing the oil again.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Honda SH 300i
How to Reset the Oil Change Light on the Honda SH 300i
Sh 300i To reset the Oil Change light on the Honda SH 300i, turn on the ignition by turning the key in the ignition switch. Wait for the display to show the …
How to Reset the Oil Change Light on the Honda SH 300i
How to Reset the Oil Change Light on the Honda SH 300i
Sh 300i To reset the Oil Change light on the Honda SH 300i, first turn on the ignition to check that the light is illuminated. Once confirmed, switch off the…
How to Perform an Oil Change on the Honda SH 300
How to Perform an Oil Change on the Honda SH 300
Sh 300i Discover the steps to perform the routine maintenance oil change on the Honda SH 300i scooter. First, position your scooter on the centre stand and s…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos