Do it yourself
Frequently asked questions about cars and motorcycles
To reset the Oil Change light on the Honda SH 300i, turn on the ignition by turning the key in the ignition switch. Wait for the display to show the "Total" message. Once this appears, press and hold both the TRIP and CLOCK buttons. After a few seconds with the buttons pressed, you will notice the Oil Change light will turn off. Once this light has been reset, you can turn off and then turn on the ignition again to verify that the reset was successful.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 300i The Honda SH 300 features a warning light on the instrument panel that alerts the owner when it's time for an oil change. If you perform the oil chan…
Sh 300i To reset the Oil Change light on the Honda SH 300i, first turn on the ignition to check that the light is illuminated. Once confirmed, switch off the…
Sh 300i Discover the steps to perform the routine maintenance oil change on the Honda SH 300i scooter. First, position your scooter on the centre stand and s…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos