Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Cover on a Honda CB 650R

Model: Honda Cb 650 R

Video tutorial

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Honda CB 650R
How to Replace the Air Filter on a Honda CB 650R
Cb 650 R Today’s main instructions will show you how to remove and replace the engine air filter on the Honda CB 650R motorcycle. First, place the bike on a s…
How to Replace the Spark Plugs on the Honda CB 650R
How to Replace the Spark Plugs on the Honda CB 650R
Cb 650 R In this video tutorial, you will learn how to remove and replace the spark plugs of the engine of the Honda CB 650R motorcycle. First, place the moto…
How to Remove the Display from the Instrument Cluster of the Honda CB 650R
How to Remove the Display from the Instrument Cluster of the Honda CB 650R
Cb 650 R Today's guide will show you the steps to remove and replace the display from the instrument cluster of the Honda CB 650R. First, place your motorcycl…

How to Change the Spark Plugs on a Kawasaki Z900RS?

To change the spark plugs on a Kawasaki Z900RS, follow these steps. First, ensure the motorcycle engine is cold. Next, locate the spark plugs on the engine, positioned on the top of the engine near the cylinder head. Using a spark plug socket, carefully unscrew the spark plugs from their housing. Take care not to damage the threads of the spark plugs or the cylinder head holes. Before installing the new spark plugs, check that they are the correct size and that the gap (distance between the electrodes) is set correctly. Screw the new spark plugs into the housing, ensuring not to overtighten to avoid damage. Finally, reconnect the spark plug leads and ensure they are securely attached to the spark plugs. Once the spark plug replacement is complete, start the engine and check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos