Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will show you the steps to remove and replace the display from the instrument cluster of the Honda CB 650R. First, place your motorcycle on the centre stand and start unscrewing the fastening screws located behind the instrument cluster using an Allen key; then disconnect the electrical connector found at the back, as illustrated in the video. At this point, remove the instrument cluster display and replace it with the correct new one if necessary; make the connection and check its operation before securing it!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Cover on a Honda CB 650R
How to Replace the Engine Cover on a Honda CB 650R
Cb 650 R This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, plac…
How to replace the air filter of the Honda CB 650R
How to replace the air filter of the Honda CB 650R
Cb 650 R Today's main instructions will show us how to disassemble and replace the air filter of the engine of the Honda CB 650R motorcycle. First of all, we …
How to Replace the Front Brake Pads on a Honda CB 650R?
How to Replace the Front Brake Pads on a Honda CB 650R?
Cb 650 R The procedure for replacing the front brake pads on a Honda CB 650R can be carried out by loosening the screws that secure the brake caliper to its h…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos