Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Lever of the Honda SH 125i?

Model: Honda Sh 125i
Part:

Video tutorial

To replace the brake lever of the Honda SH 125i, access the nut located at the bottom of the lever, where it is fixed to the handlebar. This nut needs to be loosened to remove the bolt it is attached to: by removing this bolt, you will be able to free the lever and remove it completely.

Once the old lever is removed, insert the new one, securing it in place by inserting the bolt and the corresponding nut; then check that the brake functions correctly.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Honda SH 125i Scooter?
How to Replace the Front Brake Pads on a Honda SH 125i Scooter?
Sh 125i In this tutorial, you will see how to replace the front brake pads on a Honda SH 125i scooter, a task that is extremely simple and quick. First, posi…
How to Remove the Rear Wheel of the Honda SH 125i
Sh 125i Follow these brief steps to remove and replace the rear wheel or tyre of the Honda SH 125i scooter. First, place your scooter on the centre stand and…
How to Remove the Rear Wheel of the Honda SH 125i
How to Remove the Rear Wheel of the Honda SH 125i
Sh 125i This procedure will show you how to remove and replace the rear wheel with the tyre of the Honda SH 125i scooter. First, place the scooter on the cen…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos