Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Nsc 110

Model: Honda Nsc 110
Part: Engine oil

This guide will show you how to carry out the routine maintenance service by replacing the engine oil and air filter of the Honda NSC 110 Vision scooter. First, place your scooter on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small metal oil filter as shown in the video. Now pour in the new engine oil, checking the level with the dipstick; finally, replace the air filter by unscrewing the screws of the cover to remove it!

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Variator on the Honda NSC 110?
How to Replace the Variator on the Honda NSC 110?
Nsc 110 To replace the variator on the Honda NSC 110, loosen the screws securing the transmission cover located on the left side of the bike near the rear wh…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos