Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, see how to replace the headlight bulb on a Honda VFR 800, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate the power connector at the back and disconnect it by pulling it towards you. Next, remove the large rubber cap, unclip the metal clip, and take out the bulb from the housing. Finally, insert the replacement bulb and reassemble everything by following the reverse procedure.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vfr 800 To adjust the clock of the Honda VFR 800, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once th…
Vfr 800 In order to replace the clutch of the Honda VFR 800, you need to loosen the screws that secure the cover casing located on the right side of the moto…
Vfr 800 In this tutorial, you will see how to set the time on the Honda VFR 800, a very simple and quick operation to perform, for example, after disconnecti…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos