Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Resetting the oil service on a Honda Click 125 scooter, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance work. Start by inserting the key, then turn on the ignition and hold down the two buttons located below the display. Once the time starts flashing, navigate to the service interval with quick presses of the right button, and while holding the same button, reset it. Restart the ignition to check that the reset has been successful.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on the Honda Click 125 Scooter
How to Reset the Oil Service on the Honda Click 125 Scooter
Click 125 Resetting the oil service on the Honda Click 125 scooter, as shown in this tutorial, is an extremely simple and quick operation. Before doing this, e…
How to Reset the Service on a Honda Click 125 Scooter?
How to Reset the Service on a Honda Click 125 Scooter?
Click 125 .. This tutorial shows how to reset the oil service on a Honda Click 125 scooter, a very simple and quick operation. Before.. …
How to Reset the Service on the Honda Click 125 Scooter
How to Reset the Service on the Honda Click 125 Scooter
Click 125 In this tutorial, see how to reset the service on the Honda Click 125 scooter, a very simple and quick operation to perform only after completing all…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos