Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Nc750x
Part: Battery

In this tutorial, you will see how to access the battery in a Honda NC750X, a very quick and useful operation if you need to replace it or simply recharge it. First, open the rider's seat, then locate the panel on the front wall of the compartment and, by unscrewing the relevant screws with a cross-head screwdriver, open it. To remove the battery, simply disconnect both terminals starting with the negative, unclip the securing strap, and pull it out of its housing. To fit the replacement, just follow the reverse procedure.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the headlight of the Honda NC750X
How to adjust the headlight of the Honda NC750X
Nc750x Adjusting the headlight of the Honda NC750X is a very simple operation that can be done independently thanks to our video tutorial. The first step is…
Removing the seat of the Honda NC750X
Removing the seat of the Honda NC750X
Nc750x If you need to make modifications, here’s how to remove the seat of the Honda NC750X. Start by unlocking the seat using the ignition key, turning it …
How to replace the battery of the Honda Nc 750x
How to replace the battery of the Honda Nc 750x
Nc750x Replacing the battery of the Honda Nc 750x is a simple and quick operation to be carried out independently. The battery we will use for the replaceme…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos