Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Nc750x
    4. : Removal of the Honda NC750X seat

Model: Honda Nc750x
Part:
Removal of the Honda NC750X seat

In case we need to make some changes, let's see how to proceed to remove the seat of the Honda Nc 750x. We start by unlocking the seat by turning the ignition key to the left, so we can lift the rear section of the seat. With a ratchet wrench equipped with a 10mm socket, we unscrew the two bolts located at the top of the rider's seat section, in order to lift it and remove it from its housing. We then move on to the passenger seat section, which we will remove after unscrewing, again with the ratchet wrench, the three bolts that hold it on the hinge.


Posted on 6 February 2024 by ScegliAuto

How do you replace the air filter on the Harley Davidson Dyna?

The procedure for replacing the air filter on the Harley Davidson Dyna involves loosening the screws that secure the cover located on the right side of the motorcycle, just below the fuel tank. Once the cover has been removed, the underlying filter can be located: it must be removed from its seat by loosening the fixing screws and pulling it out from inside its housing. After the old filter has been removed, the new replacement piece can be installed, securing it in place with the screws and reinstalling the removed cover.

Watch the video!


by ScegliAuto

More videos