Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This video shows how to permanently fix the problem of the seat on the Forza 300 that doesn't close properly. Remove the plastic cover of the lock (after removing the seat) and you will see that the hook barely engages; it doesn't fit well into the lock, so the closure isn't optimal. You will need a 10mm socket, two unthreaded 10mm bolts, and some thread lock. Remove the bolts, then insert the unthreaded bolts to create spacing, and apply thread lock. Screw into the plate; this will increase the thickness of the plate, allowing the lock to fit completely into the housing.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Honda Forza 300?
How to Replace the Battery on a Honda Forza 300?
Forza To replace the battery on a Honda Forza 300, open the under-seat compartment with the appropriate key so that the seat can lift, providing access to …
How to replace the air filter on a Honda Forza 300?
How to replace the air filter on a Honda Forza 300?
Forza To replace the air filter on a Honda Forza 300, loosen the screws that secure the cover of the casing containing the filter, located directly above t…
How to Replace the Battery in the Honda Forza 300
How to Replace the Battery in the Honda Forza 300
Forza In today's video, you will see how to locate the service battery in the midsize Honda scooter, the Forza 300. First, park the scooter on the centre s…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos