Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Rebel 250
To replace the front brake pads on the Honda Rebel, loosen the screws that secure the brake caliper to the brake disc. Once these screws are loosened, you can completely detach the caliper from its housing. At this point, the pads located inside the caliper can be removed. You can then insert the new pads into the caliper, reposition it onto the disc, and secure it with the appropriate screws. After installation, check that the brake is functioning properly.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery on a Honda Rebel 250
Replacing the Battery on a Honda Rebel 250
Rebel 250 Today, we will show you a very important but really simple maintenance task: replacing the battery on a Honda Rebel 250. As clearly shown in the vide…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos