Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Beat
Part: Engine oil

In this tutorial, you can see how to change the engine oil in the Honda Beat scooter, a very simple and quick operation to be performed every 12 months or 1,000 miles. First, ensure that the engine is completely cold, then place a container underneath it and, using a 12mm spanner, unscrew the drain bolt. Next, remove the dipstick, allow all the oil in the system to drain out, clean the filter of any residue, and reassemble everything. Finally, pour the new oil through the designated hole.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Beat .. In this tutorial, you will see how to change the engine oil in the Honda Beat scooter, a very simple and quick operation. First, ensure.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos