Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda X Adv
Part: Brake pads

To replace the front brake pads on a Honda X-ADV, loosen the screws that secure the brake caliper to the corresponding front disc. Once these screws are loosened, you can slide off the caliper and remove the pin that holds the pads in place. After the pads are released, insert the new ones and secure them with the appropriate pin, allowing you to reposition the caliper onto the disc. After installation, check that everything functions correctly.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Honda X-ADV?
How to Replace the Front Brake Pads on the Honda X-ADV?
X Adv To replace the front brake pads on the Honda X-ADV, loosen the bolts securing the corresponding brake caliper: once it is detached from its disc, rem…
How to replace the battery in the Honda X-ADV 750 scooter?
How to replace the battery in the Honda X-ADV 750 scooter?
X Adv In this tutorial, we can see how to replace the battery in the Honda X-ADV 750 scooter, an extremely simple and quick operation. First of all, make s…
How to adjust the time on the Honda X-ADV 750 scooter?
How to adjust the time on the Honda X-ADV 750 scooter?
X Adv In this tutorial we can see how to adjust the time on the Honda X-ADV 750 scooter, an extremely simple and quick operation, to be carried out for exa…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos