Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Tmx 125

Model: Honda Tmx 125
Part: Engine oil

To change the motor oil of a Honda TMX 125, start by warming up the engine for a few minutes to fluidify the oil. Make sure the motorcycle is on a flat surface and turn off the engine. Locate the oil drain plug on the engine, usually located on the bottom side. Use an appropriate wrench to unscrew the drain plug and let the used oil drain completely into a collection tray. Once the draining is complete, securely screw the drain plug back on. Next, find the oil fill cap, usually located on one side of the engine. Remove the cap and use a funnel to slowly pour the recommended amount of new motor oil as stated in the owner's manual. Make sure not to exceed the maximum level indicated. After filling the oil, put the fill cap back on and tighten it securely. Start the engine for a few minutes and check for any oil leaks. This ensures that the new oil is evenly distributed in the engine and everything is in order to resume driving with your Honda TMX 125.

Posted on 20 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Honda CEE 125
How to Change the Engine Oil on a Honda CEE 125
Honda Cre 125 Today, we will see how to change the engine oil on your Honda CEE 125. It is a fairly simple operation, just do it with a bit of care. First, remove …
How to change the motor oil of a Honda Zuma 125?
How to change the motor oil of a Honda Zuma 125?
Zuma 125 To change the motor oil of a Honda Zuma 125, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and pla…
How to change the engine oil of a Honda Click 125?
Click 125 To change the engine oil of a Honda Click 125, start by turning on the engine and letting it run for a few minutes to warm up the oil, making it more…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos