Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Honda Zuma 125, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the motorcycle on a central stand to ensure stability. Locate the oil drain plug, located under the engine. Place a collection tray under the plug and use a wrench to unscrew it, allowing the used oil to drain completely into the tray. After the oil has finished dripping, securely screw the drain plug back in. Find the oil filler cap, located on the side of the engine, and remove it. Use a funnel to slowly pour the recommended amount of new oil as stated in the owner's manual. After pouring the oil, replace the filler cap and tighten it securely. Start the engine for a few minutes and then turn it off, checking for any oil leaks. This ensures that the new oil is evenly distributed in the engine.

Posted on 6 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Yamaha Zuma 125 Scooter?
How to Change the Engine Oil on a Yamaha Zuma 125 Scooter?
Zuma 125 In this tutorial, we will see how to change the engine oil on a Yamaha Zuma 125 scooter, an extremely simple and quick operation. First, wait until t…
How to Change the Engine Oil in a Yamaha Zuma 125 Scooter?
How to Change the Engine Oil in a Yamaha Zuma 125 Scooter?
Zuma 125 In this tutorial, see how to change the engine oil in the Yamaha Zuma 125 scooter, a straightforward task to perform every 12 months. First, ensure t…
How to Replace the Spark Plug on a Yamaha Zuma 125 Scooter?
How to Replace the Spark Plug on a Yamaha Zuma 125 Scooter?
Zuma 125 In this tutorial, you will learn how to replace the spark plug on a Yamaha Zuma 125 scooter, a very simple and quick operation. First, ensure that th…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos