Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Yamaha Zuma 125 Scooter?

Model: Yamaha Zuma 125
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the Yamaha Zuma 125 scooter, a straightforward task to perform every 12 months. First, ensure the engine is completely cold, then start it and let it idle for a couple of minutes.

Once turned off, remove the dipstick, position a container underneath the scooter, and using a 17mm spanner, unscrew the drain bolt. Next, open the filter housing and remove any dirt residue, reassemble everything, and pour new oil through the dipstick hole.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a Yamaha Zuma 125 Scooter?
How to Replace the Spark Plug on a Yamaha Zuma 125 Scooter?
Zuma 125 In this tutorial, you will learn how to replace the spark plug on a Yamaha Zuma 125 scooter, a very simple and quick operation. First, ensure that th…
How to Change the Engine Oil on a Yamaha Zuma 125 Scooter?
How to Change the Engine Oil on a Yamaha Zuma 125 Scooter?
Zuma 125 In this tutorial, we will see how to change the engine oil on a Yamaha Zuma 125 scooter, an extremely simple and quick operation. First, wait until t…
How to set the time on a Yamaha Zuma 125 scooter?
How to set the time on a Yamaha Zuma 125 scooter?
Zuma 125 In this tutorial, you will learn how to set the time on a Yamaha Zuma 125 scooter, a very simple and quick operation, for example, after disconnectin…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos