Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : Rks 200

How to Replace the Clutch on a Keeway RKS 200?

Model: Keeway Rks 200
Part: Clutch

Video tutorial

To replace the clutch on a Keeway RKS 200, loosen the screws that secure the protective cover located on the right side of the bike. Once the screws are loosened, remove the cover to access the underlying discs.

These can now be extracted from their housing so that new ones can be inserted. Secure the new discs with the appropriate screws, then cover everything with the protective cover to ensure everything functions correctly.


Updated on 15 November 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Keeway RKS 150
How to Replace the Clutch on a Keeway RKS 150
Rks 150 To replace the clutch on a Keeway RKS 150, you need to loosen the screws securing the cover on the right side of the bike, in the central lower area:…
Fitting the Clutch on a Keeway RKS 150
Fitting the Clutch on a Keeway RKS 150
Rks 150 In this video, you will see instructions on how to correctly fit the clutch on a Keeway RKS 150. First, clean the clutch pack thoroughly and soak the…
How to Replace the Clutch on the Keeway RKS 150?
How to Replace the Clutch on the Keeway RKS 150?
Rks 150 To replace the clutch on the Keeway RKS 150, you need to loosen the screws that secure the cover located on the right side of the bike, in the centra…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil in the Kawasaki ZX-10R?

In this tutorial, you will see how to change the engine oil in the Kawasaki ZX-10R, an extremely simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket. Allow all the oil contained in the engine to drain out, unscrew the old filter, and tighten the replacement. At this point, simply reinsert the bolt and add the required amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos