Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of a Honda Jazz

Model: Honda Jazz MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

How to remove the Honda Jazz door panel? In this video, learn how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin disassembly: use a lever to remove the plastic cover of the handle, then use a screwdriver to unscrew the internal door handle, removing the screws in the process.

Once all screws are removed, use the lever to detach the door opening lever and the window regulator connectors. Carefully pull off the door panel, ensuring not to lose the clips behind the plastic panel that was removed first.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Honda Jazz
Removing the Door Panel of a Honda Jazz
Honda Jazz (2008-2013 / MK 2) Learn how to remove the door panel of a Honda Jazz. Remove the door panel to replace it or to access the interior. Unscrew the screws located in the …
How to Remove the Door Lock on Honda Jazz
How to Remove the Door Lock on Honda Jazz
Honda Jazz (2008-2013 / MK 2) Want to remove the lock from inside the door? Here’s how to remove the lock on a Honda Jazz. Open the car door; remove the plastic covering panel fro…
Removing the Door Panel on Honda Jazz
Removing the Door Panel on Honda Jazz
Honda Jazz (2001-2008 / MK 1) Remove the door panel on the Honda Jazz if it is damaged. Here’s how to do it. Remove all the plastic cover pieces above the panel, including the com…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos