Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of a Honda Jazz

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Learn how to remove the door panel of a Honda Jazz. Remove the door panel to replace it or to access the interior. Unscrew the screws located in the space of the upper door opening lever, then remove the plastic cover above the internal handle of the panel.

Disconnect the electrical connectors of the window lifter. Pull the panel off with your hands and detach it from the door (disconnect the power wiring and the opening cable).

Carry out the desired maintenance inside the door or fit a new cover panel with attached parts.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on Honda Jazz
Removing the Door Panel on Honda Jazz
Honda Jazz (2013-2019 / MK 3) Do you want to remove the covering panel of the Honda Jazz? Here’s how to disassemble the covering panel and all associated parts. Use a lever to rem…
Where to Find the OBD Port on the 2018 Honda Jazz
Where to Find the OBD Port on the 2018 Honda Jazz
Honda Jazz (2013-2019 / MK 3) If you intend to connect to the ECU of your Honda Jazz third generation (2018), but do not know where the OBD port is located to connect the diagnost…
Removing the Rear Door Panel of a Honda Jazz
Removing the Rear Door Panel of a Honda Jazz
Honda Jazz (2008-2013 / MK 2) Remove the rear left door panel on a Honda Jazz. Disconnect the battery terminals located in the engine bay, using a screwdriver, undo the screw in t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos