Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external door handle of the front door of the Honda CR-Z.

Model: Honda Cr Z MK 1 - Years 2010-2016
Part: Handle

Let's see the instructions on how to disassemble and replace the outer door handle of the front door of the Honda CR-Z. First, we open the front door of the vehicle and start removing the door panel by unscrewing all the fastening screws and disconnecting the electrical connector for the window switch; then we unclip the internal mechanism of the handle, subsequently unscrewing the side screws of the lock, as shown in the video. At this point, we disconnect the handle cable, removing it from the outside; we replace it with the new one and reassemble everything!

Posted on 30 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Honda CR-Z?
How do you replace the front brake pads of the Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) To replace the front brake pads of the Honda CR-Z, you will need to lift the car so that the corresponding front wheel is not in contact with the gro…
How to replace the gear knob in the Honda CR-Z?
How to replace the gear knob in the Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) In this tutorial we can see how to replace the gear knob in the Honda CR-Z, an extremely simple and quick operation. First of all, let's go inside th…
How to reset the service light on the Honda CR Z
How to reset the service light on the Honda CR Z
Honda Cr Z (2010-2016 / MK 1) Today we will explain how to reset the service light on a 2016 Honda CR Z car. To reset the light, we need to turn on the instrument panel and press …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos