Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Is the Fuse Diagram for the Honda CR-Z?

Model: Honda Cr Z MK 1 - Years 2010-2016
Part: Fuse box

In this video, you can see where the fuse boxes are located on the Honda CR-Z and their respective diagrams, useful if you need to check the fuses of a malfunctioning device. The first box is inside the cabin, behind the small door located in the lower left area of the dashboard on the driver's side. The second box is located in the engine compartment, protected by the black plastic cover next to the battery. Ensure you replace any blown fuses with spares of the same amperage and work with the vehicle turned off.

Posted on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Honda CR-Z?
How do you replace the front brake pads of the Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) To replace the front brake pads of the Honda CR-Z, you will need to lift the car so that the corresponding front wheel is not in contact with the gro…
How to Reset the Service Light on the Honda CR-Z?
How to Reset the Service Light on the Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) This tutorial explains how to reset the service light on the Honda CR-Z, a very simple and quick operation to perform only after completing all requi…
How to Reset the Service Light on a Honda CR-Z?
How to Reset the Service Light on a Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) In this tutorial, we will see how to reset the service light on a Honda CR-Z, an extremely simple and quick operation to be performed only after comp…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos