Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset warning lights that stay on the dashboard of the Honda Civic MK10

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Dashboard

See other generations:
Video tutorial

If multiple warning lights appear on the dashboard of the Civic MK10, the problem is often electrical. The most common causes are: weak alternator, flat battery, or corroded contacts.

To diagnose, check the battery: with the engine off, it should read about 12.6 V; with the engine running, between 13.8 and 14.4 V. Check the terminals and clean them if corroded. Test the alternator with a multimeter and check the auxiliary belt.

Inspect the wiring for signs of wear and check the fuses. If the diagnosis does not resolve the issue, it is advisable to consult a good mechanic.

This procedure is valid for most Honda models.


Posted on 20 August 2026 by ScegliAuto


Related tutorials

How to Change the Brightness and Colour of the Ambient Lights on the Honda Civic
How to Change the Brightness and Colour of the Ambient Lights on the Honda Civic
Honda Civic (2016-2021 / MK 10) Today's steps will show you how to change the colour and brightness of the ambient lights on the dashboard of the Honda Civic. First, get inside the …
What to Do if the Brake Lights Stay On When the Car is Off
What to Do if the Brake Lights Stay On When the Car is Off
Honda Civic (2006-2012 / MK 8) In this video, we see how to resolve a problem that may seem unsolvable: the brake lights (stop lights) stay on even when the car is off. In this cas…
How to Reset the Oil Life Light on the Honda Civic Mk10
How to Reset the Oil Life Light on the Honda Civic Mk10
Honda Civic (2016-2021 / MK 10) This guide shows how to reset the engine oil life light on the Honda Civic Mk10. To perform this operation, press the start button twice without pres…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos