Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob in the Honda CR-Z?

Model: Honda Cr Z MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Shift knob

Video tutorial

In this tutorial we can see how to replace the gear knob in the Honda CR-Z, an extremely simple and quick operation. First of all, let's go inside the car, then we grab the lower ring of the knob, pull it down with force and unlock it. We then grab the base of the knob with pliers, unscrew the knob itself, helping ourselves if necessary with a cloth and a second pair of pliers, and separate it from the rod. At this point, we position the replacement knob, screw it in and fix the upper ring of the boot again using the pliers.


Posted on 6 May 2025 by ScegliAuto


Related tutorials

Installation of Additional Armrest
Installation of Additional Armrest
Honda Cr Z (2010-2016 / MK 1) Ensure you have the anti-theft code for the car radio. Disconnect the negative cable from the battery. Remove the lower centre of the tunnel. Insert …
How do you replace the front brake pads of the Honda CR-Z?
How do you replace the front brake pads of the Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) To replace the front brake pads of the Honda CR-Z, you will need to lift the car so that the corresponding front wheel is not in contact with the gro…
What Is the Fuse Diagram for the Honda CR-Z?
What Is the Fuse Diagram for the Honda CR-Z?
Honda Cr Z (2010-2016 / MK 1) In this video, you can see where the fuse boxes are located on the Honda CR-Z and their respective diagrams, useful if you need to check the fuses of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos