|
Do it yourself
| |||
| ||||
How to reset the tire pressure light on a Honda CR-V?
Model: Honda CR-V
MK 5
- Years:
2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
To reset the tire pressure light on a Honda CR-V, turn on the instrument panel without starting the engine. Locate the reset button located under the steering column and press it, holding it down for a few seconds. This will bring up the menu dedicated to the tire pressure monitoring system (TPMS) on the instrument panel display. Follow the instructions displayed to start the calibration process of the system. During this phase, the vehicle will begin to record the new pressure parameters. Before proceeding, make sure all tires are inflated to the correct pressure, as indicated in the car manual or on the inner label of the driver's side door. After completing the reset, drive the car for a few kilometers so that the system can update properly. If the light remains on, there may be an issue with the TPMS sensors or the tires, such as leaks or damage, which require further inspection.
Posted on 30 December 2024 by ScegliAuto
Related tutorials
Honda CR-V
(2012-2017 /
MK 4)
In a few simple steps, we will see how to reset the tire pressure warning light on the Honda CR-V; before resetting the TPMS sensors, it is necessary…
Honda CR-V
(2023-2026 /
MK 6, RS)
Today we will discover the instructions on how to reset the tire pressure warning light on the Honda CR-V; before resetting the TPMS sensors, it is n…
Honda CR-V
(2012-2017 /
MK 4)
In this tutorial, we can see how to reset the tire pressure light in the Honda CR-V, an extremely simple and quick operation, to be carried out only …
Other guides you may be interested in
|
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
